loading
First Posts All Posts RoboRealm's Answers

1497 posts
ThreadLast postPostsViews
Block Detection [2]
William, There isn't a way to detect squares like the Circles module does. Its a basic difference b...		 4 years 4 787
Block Detection [4]
William, If this is just for fun, you can experiment around with various object recognition techniq...		 4 years 4 787
problem in sprkfun_mega module [5]
Nithy, We were able to verify the problem but since the fix we cannot replicate the issue in either...		 3 years 7 788
installable versions [2]
Albert, 1. You can always get previous versions by appending &v=2.70.0...		 4 years 2 789
variable [3]
Pierrick, That shouldn't happen (the appending) but based on they way you have configured your rob...		 6 years 2 791
Roborealm wth Flir one Android camera to detect IR signatures [2]
Mark, If you can get the FLIR image into a PC, then yes, it is possible to do. A FLIR image is esse...		 4 years 2 791
Working with multiple tabs [2]
Please check ht...		 2 years 2 793
WVC200 image not writing to RR... [3]
Jeff, Typically that means that it is accessing the camera and loading in frames but is unable to d...		 6 years 2 793
OPC server [3]
Does the Delphi GUI implement an OPC server or client? I.e. what side do you need in RR? The client is a lot simpler to create w...		 5 years 4 794
Versions [3]
Matt, I'm not sure this is the answer to your questions buy you can find the versions off from the...		 6 years 3 794
OPC server [2]
That looks like something we can incorporate. Give us some time to review that spec and I'll post an update here probably somet...		 5 years 4 794
Webcam suggestions [2]
Sam, We've actually created a mounting system for that camera (and its successor) that was initiall...		 4 years 2 794
Can RR run steper motor ? [2]
Sam, It might be possible but it will really depend on what hardware you have and how the communica...		 6 years 2 795
No sensor reading from Roomba with ser2net [2]
Reinhold, So it appears that reading from the device no longer works? Did this happen after you up...		 5 years 2 798
dought [3]
You can use the Marker module to save the current image and switch to anoter camera. Or you can also use the Mosaic to combine t...		 7 years 2 798
RoboGeek Demo tracking program with Roborealm [2]
Thinkbig, The above VBScript is written with the 500 to 2500 value range in mind. Typically this is...		 3 years 2 800
High Quality Camera Without Flicker [3]
Maize, For higher frame rates than that you may have to look at machine vision cameras such as thos...		 6 years 2 800
Running multiple RoboFiles simultaneously [2]
Tim, Yes, you can enable multiple instances by either selecting Optio...		 2 years 3 800
New Robots [4]
Kurt, We've heard back from Corpora and unfortunately it looks like things will not work out (its ...		 6 years 3 802
How to execute/run a robo file [2]
Vy, The easiest way is to just continuously analyse the images coming in ... assuming that you don'...		 5 years 2 802

« Prev   10  11  12  13  14  15 16  17  18  19    Next »