loading
1455 posts
ThreadLast postPostsViews
importing variables into roborealm [8]
The order of the modules is relevant ... I can't tell if that is your issue unless you post your robofile. Its also possible som...
2 years 14 861
Socket Server [8]
We're having problems replicating your issue. If you try the following python script on another machine do you see the same beha...
2 years 15 1272
Socket Server [9]
Were you able to replicate our results? Did you find any additional configuration that could be done to the PIC ethernet module ...
2 years 15 1272
Socket Server [5]
Wongfeirang, Do you notice that sometimes it switches the data and sometimes not? Or does it always...
2 years 15 1272
Socket Server [13]
Wongfeirang, Yes, that fix would have applied to the USB HID module too. I've checked for any delay...
2 years 15 1272
Socket Server [15]
We removed the changes we added when this was first identified as an issue. So the 2 second delay should be removed and back to ...
2 years 15 1272
Socket Server [2]
Wongfeirang, Go ahead and download the latest version. We tested a couple other UDP tools and found...
2 years 15 1272
Socket Server [11]
Wongfeirang, Thanks for the screenshots. That helped direct us to the appropriate area. I had thoug...
2 years 15 1272
Socket Client data to Variable [4]
Ok, did you try adding the receive sequence mentioned above to the Socket Client module? I don't see that in your attached robof...
2 years 8 840
Socket Client data to Variable [2]
Steve, Its a bit tricky since you want to extract out the middle field. There was a way to do this ...
2 years 8 840
Socket Client data to Variable [8]
Normally that's a good thing! The reason the "set once" checkbox is there is for initialization. Otherwise, RR is a 'declared wh...
2 years 8 840
Socket Client data to Variable [6]
Try removing the Set Speed = "" in the second line of the pipeline. :-) Or at least select the "set...
2 years 8 840
hardware needed [2]
It should just function fine on a regular PC unless you have a large video image (> 640x480). See
2 years 2 622
Roborealm Purchase [2]
Append &v=2.77.10 to your download URL (once purchased as this does NO...
2 years 2 504
AUV [8]
Yes, the motors will most likely react to the PWM signal ... thus the 500 to 2500 range. Note, 1000...
2 years 11 1212
AUV [10]
Ragronark, Q1: Not sure if that would be the only change. It is certainly the most common since dif...
2 years 11 1212
AUV [6]
Have you written a quick Arduino Sketch that sets the values of pin3 and pin9 to 800 and 1000 to see if the motors respond?
2 years 11 1212
AUV [2]
I'm assuming this is a duplicate/related post for ...
2 years 11 1212
AUV [4]
Can you verify that the motors work and that setting those pins on the arduino cause the motors to move?
2 years 11 1212
Keyboard Shortcuts [2]
Jeremy, We updated those keystrokes to use F2, F3 and F4 for the 3 tabs (F1 goes to help) as we ran...
2 years 2 556

« Prev   12  13  14  15  16  17 18  19  20  21    Next »
 New Post