loading
1454 posts
ThreadLast postPostsViews
output in shape matchinh [2]
Francesco, There are a *lot* of ways to get information out from RR. Its a good idea to review som...
1 month 2 69
OCR, 1D and 2D codes [2]
Pat, The best way to verify this is to use the Trial version and the Barcode module. It has all the...
1 month 2 72
3D measurement [2]
Richard, While this is possible (we have worked on similar size measuring projects, its not easy. T...
2 months 2 96
If statement [2]
Grant, Yes, there are many ways to do this but it depends on what you mean by "output". There are m...
2 months 2 96
OCR support this font? [2]
Seems to work fine just using the default settings with the "just digits" checkbox set. See the attached robofile. Perhaps you t...
1 month 3 98
Quality Control [2]
Neil, Yes, you can certainly use the software for that. As its a toolbag of different techniques ca...
2 months 2 114
If statement with time variablr [2]
Frederick, The easiest way would be to add in the Filter Variable and use the Mean over 30 past val...
2 months 3 117
Regarding Vcam [2]
You do this indirectly. First by getting the RTSP module to capture the right image. Once you see the image in the main RR GUI y...
4 months 2 142
communication between labview and roborealm [2]
Domingo, Unfortunately since there isn't an explicit way to get raw binary data in XML the above re...
3 months 2 146
Error Message connecting to SmartDashboard [2]
Albert, It does not seem like you are actually communicating with a network table server. Port 22? ...
3 months 2 153
VCam [2]
T. You can try installing the VCam directly by using either InstallVCam32.exe or InstallVCam64.exe ...
4 months 2 159
RR save setup for all windows accounts [2]
Kresimir, That is by design since most users cannot write to the global registry (unless they are a...
6 months 2 167
Blob filtering [4]
If your camera doesn't move much it might be possible to only calculate the mask once in a while since trees don't typically mov...
4 months 4 173
Blob filtering [2]
Yes, that is possible. The blob filter is one way to do this. You could also just draw a white rectangle around the border of 30...
4 months 4 173
Where is the standard license version? [2]
Sorry, no, the personal version is no longer being distributed. The commercial version is the only available version.
3 months 2 176
Bug with using variable in Write_Text variable [2]
Tim, That module wasn't updated to accomidate the [variable] expression in its filename. It was cre...
5 months 3 181
Image processing with roborealm [2]
Romulo, The solution would depend on how the drill bit can be imaged. For example, is it always ass...
7 months 2 187
Movement Strobe use [2]
Josh, Not sure if you included a robofile or not but it seems to be missing in the post.
6 months 2 193
Detection of motion [2]
You need to determine what device you will use to accept communication from the PC to actually change a voltage level. For examp...
7 months 2 204
Load Image bug [4]
Tim, Its possible that there is some sort of weird file in the folder too that causes the filename ...
5 months 4 215

  1 2  3  4  5  6  7  8  9  10    Next »
 New Post