loading
1460 posts
ThreadLast postPostsViews
Reconnect to camera when lost connection? [4]
Alec, Assuming you are using the Genicam module, that will auto reconnect if possible (i.e. the con...
1 year 9 452
Reconnect to camera when lost connection? [2]
What camera/connection are you using? A webcam? Internet cam? GigE cam? STeven. ...
1 year 9 452
Background Removal [2]
Use the Math module with an AND function using the mask image and the original image as the two image selections. What this does...
1 year 3 453
Recognition of B/W Laserscan Targets [2]
You could do crossing lines ... or just find the COG since that will reflect the same position but take into account all pixels ...
1 year 2 457
variables [2]
Krishna, The name of the variable should be in quotes and reference the COM object: ...
2 years 2 459
subpixel calculation and write variables [4]
Pat, I understand that what you are asking for is for the Harris points to be represented in decima...
2 years 4 459
subpixel calculation and write variables [2]
Pat, It will really depend on what value you are talking about. As the COG is calculated from many ...
2 years 4 459
Load Module [2]
If you are saving the image from RR, why do you want to reload it back into the same application that just saved it? If you plan...
2 years 2 466
Set Camera Problem [2]
Josh, I just tried this in the latest version with the API enabled and it seemed to work as expecte...
2 years 4 468
Set Camera Problem [4]
Josh, Check that in the API tab that the timeout is set to zero (infinite) and that at least 5 thre...
2 years 4 468
Error Message connecting to SmartDashboard [2]
Albert, It does not seem like you are actually communicating with a network table server. Port 22? ...
1 year 2 469
MicroUSB U451 board [4]
Tom, Looks like that board was newer since the module was created. It was checking for the previous...
2 years 5 472
RoboClaw v4+ [2]
In case others read this ... a new revision of the RoboClaw IonMC module is up with temperature and motor current variables adde...
2 years 2 473
RoboRealm Crash [2]
Works fine for us. It might be some particularity with your camera. Did you submit a crash report when restarting RR? We don't s...
1 year 7 478
RoboRealm Crash [6]
Yes, we got them this time. Seems to have been a minor issue with the Kiosk tab. That has been fixe...
1 year 7 478
RoboRealm Crash [4]
Azim, Can you try sending them again? It appears they did not make it through. You may want to chec...
1 year 7 478
RR Won't Start when Called from Code in 64 bit (RR_COM_API_64.dll) [4]
JHao, Our mistake ... we accidentally were truncating that return value (to correct the API log dis...
1 year 4 480
RR Won't Start when Called from Code in 64 bit (RR_COM_API_64.dll) [2]
JHao, In the past the 64 bit version of the COM object would just look for the 64 bit version of RR...
1 year 4 480
OCR support this font? [2]
Seems to work fine just using the default settings with the "just digits" checkbox set. See the attached robofile. Perhaps you t...
1 year 3 486
Automatic Start Up [4]
Sandy, I think we have a good idea on what the symptoms are. It sounds like the full screen mode is...
1 year 4 487

« Prev   1  2  3 5  6  7  8  9  10    Next »
 New Post