1454 posts
ThreadLast postPostsViews
RoboGeek Demo tracking program with Roborealm [2]
Thinkbig, The above VBScript is written with the 500 to 2500 value range in mind. Typically this is...
1 year 2 323
AVM Navigator [2]
Mal, 64 bit apps are not able to load 32 bit dlls. 32 bit apps are not able to load 64 bit dlls. So...
1 year 2 324
Servo controller [2]
Yes, that should work fine. What happens with USB connections is that they look  like serial connections and the proto...
1 year 2 324
Watchdog for Roborealm [2]
Jaheer, It depends mainly on the hardware. If there are error messages that come back then the modu...
1 year 2 325
VBscript error [2]
We used to have this issue in older Windows systems that did not have the VBScript component downloaded. You can try to download...
1 year 2 325
Digital reader issue [2]
Tomaz, Perhaps you can post a raw unmodified image as would be seen from the camera? And perhaps th...
7 months 4 326
Digital reader issue [4]
Tomas, Attached is a zip file containing a robofile and the training folder needed for this to work...
7 months 4 326
RoboClaw v4+ [2]
In case others read this ... a new revision of the RoboClaw IonMC module is up with temperature and motor current variables adde...
1 year 2 331
RR Unstable During Tab Calls [2]
JHao, Can you share the robofile with us too? There doesn't appear to be any issues with the code y...
5 months 6 331
RR Unstable During Tab Calls [6]
JHao, Thanks for your CSharp code. That was helpful to test the system in a specific way. There was...
5 months 6 331
RR Unstable During Tab Calls [4]
JHao, Unfortunately neither of those reasons will cause a lockup. If a variable does not exist and ...
5 months 6 331
MicroUSB U451 board [4]
Tom, Looks like that board was newer since the module was created. It was checking for the previous...
1 year 5 332
Matching Confidence Level [2]
Frank, I assume these are metallic pieces? It seems like the image you included is reflecting the l...
1 year 2 333
Process Images in a folder [2]
Load Images is the right module to use. You have to add modules in order to process the image and save the results somewhere (ei...
1 year 2 334
Egg counting [2]
Turgut, While its not too difficult to count the eggs in a single image, on a moving conveyor that ...
1 year 2 335
completed save and open a vbScript is not possible [2]
1. Are you pressing OK in the VBScript module before exiting RR? 2. How long is your VBScript?
1 year 2 336
Automatic Image Calibration [4]
Charlie, Due to the way the interface is, it will only transform arrays that contain X, Y coordinat...
7 months 5 337
Automatic Image Calibration [2]
Charlie, Have you tried just unchecking the [x] Show Calibrated image in that module? That will sti...
7 months 5 337
Center of Gravity [2]
Muhammad, The box size is based on a percent coverage of pixels. The algorithm starts at the COG wi...
1 year 2 339
Zmodo Cameras [4]
Yes, that should work. The "module" is already installed. What it is asking for are extra DLL libra...
8 months 5 341

« Prev   1  2  3  4  5 7  8  9  10    Next »
 New Post