loading
99 posts
ThreadLast postPostsViews
No Title
Hi STeven I've tried to ask this before, but still don't understand the answer.............
10 months 2 392
license recovery
I had RR installed on a Win10 machine, that no longer boots. The drive is accessible if put in another machine as D:\  ...
1 year 2 736
Displaying FPS [2]
It's so easy to workaround, I shouldn't have raised the issue in the first place..... Roland
2 year 2 1679
Displaying FPS
I've always displayed the FPS variable on the screen in 2.76.1. However, in 2.87.30, I see 'Text Va...
2 year 2 1679
no MOUSE_X
I noticed this on ver 2.76.1, then installed 2.87.30, and see that the behavior is the same. I you ...
2 year 2 1497
Higher FPS
I took an i5 machine with a fresh install of Win7Pro Then I loaded RR. 2.76.1 only, and with no cam...
2 year 2 1454
displaying a number
Hi Steven I want to display a number variable, huge, on the screen, pretty much like a voltmeter. <...
2 year 2 1716
Eiting in kioskl mode [3]
Hi Steven Silly me I didn't realise the rectangles were still on the screen in edit mode, I just ha...
5 year 3 1788
Hardware interface
Hi STeven Do you know the method/interface most commonly used to interface to RR, in industrial sys...
5 year 3 2303
camera [3]
Thanks. Then I'll probably get colour and mono to test with. I have to...
7 year 3 1731
camera
Hi STeven I'm looking at getting this camera to experiment with; ...
7 year 3 1731
Write images
Hi STeven Is there a simple way to initialise the saved image number in 'write images'?
8 year 2 2076
versions [3]
Thanks STeven Works a treat. Roland ...
8 year 3 1786
versions
Hi STeven Is it possible to have two new system variables? I display t...
8 year 3 1786
refreshing image
If I use the 'load image' function, it seems that it only loads the image once. I ha...
9 year 3 2500
refreshing image [3]
Thanks STeven Works great. Regards Roland ...
9 year 3 2500
serial defaults
Hi STeven Looking at the serial screen, most of the fields are blank. What are these...
9 year 2 3255
maximized [3]
Hi STeven In startup there is a 'startup in full screen', but that has no border.
9 year 4 1798
maximized
How do I get RR to open 'maximised'. I am already using kiosk mode, but it leaves a margin around the edge.
9 year 4 1798
Failing to pause pipeline after waiting 10 seconds... [3]
Just chiming in here. I never knew that warning existed until the day I tried out a HD camera, the Microsoft lifecam. Up until t...
9 year 7 3538

  1 2  3  4  5    Next »
 New Post