First Posts| Thread | Last post | Posts | Views |
|
Wireless Camera Options [2]
To all Roborealm users: I was wondering what success have you had with your wireless cameras. ... |
13 year | 2 | 2830 |
|
Joystick is set at a constant value! I need different values!!
Hello STeven, and all at Roborealm; We have been in the process of building a bot and run into a slight snag using... |
18 year | 6 | 2835 |
|
SRV Comport [3]
Thanks STeven for your reply. I have got the correct drivers installed for the usb. When I run the ... |
19 year | 4 | 2882 |
|
Network Table Help [4]
We have tried disabling the firewall but it did not work. We can connect to the CRio fine, since we can run/control o... |
13 year | 6 | 2883 |
|
Picaxe Module? [3]
Use the serial port module. Come up with a protocol that you want to use. Fo... |
17 year | 2 | 2922 |
|
RR + Basic Atom pro 28 + SSC32 Seq. [2]
Dear all, I have a Lynxmotion T-HEX hexapod 4DoF. The controler is a Basic Atom pro28... |
13 year | 4 | 2947 |
|
Bug with Read_HTTP module [6]
Hi STeven, Thanks for your message and explanation--makes perfect sense. Fortunately I c... |
17 year | 5 | 2962 |
|
Bug with Read_HTTP module [5]
Patrick, I think you are on the right track. What we have found in the past is there are some buffe... |
17 year | 5 | 2962 |
Bug with Read_HTTP module [2]
Hi STeven et. al., I am using the attach .robo file to process the video feed from a Linksys wirele... |
17 year | 5 | 2962 |
|
Wireless Camera Recomendations [3]
Todd, That's a difficult question as I assume you would prefer the least expensive but most reliab... |
15 year | 2 | 2977 |
|
Wireless Camera Recomendations [2]
Hi, I am investigating using Roborealm in a college upper level robotics class. We will use lego m... |
15 year | 2 | 2977 |
Problems Saving RoboFiles [7]
I am tracking red checkers on a black background pretty effectively now. Best results seem to come from a flood fill ... |
18 year | 11 | 2989 |
|
Introducing the RR Crawler! [2]
I built this crawler out of an old Power Wheels monster truck. I used the powered wheels and built a custom steel cra... |
15 year | 2 | 2997 |
|
How i use in roboreal mi RF04 and CM02 modules
I have wireless modules RF04 (usb transceiver) and CM02 (transceiver I2C) conected in my hexapode robot, but i cant send data to... |
18 year | 1 | 3023 |
|
SRV-1 camera board frame rates? [3]
Patrick, The older version of the SRV using Zigbee radio transmission was around 3-4 fps, the newer... |
18 year | 3 | 3030 |
|
about a new module [2]
Steven have you look at DJSURES EZ-ROBOT to interface with roborealm ,boards look good with wireless web camera ,voice recogniti... |
14 year | 3 | 3051 |
|
interfacing ps3 controller with rr [2]
the joystick module detects the playstation3 controller but when i move the d-pad or any of the analog sticks nothing happens th... |
16 year | 2 | 3074 |
|
How to track arbitration moving objects? [2]
Hello, I have been using RoboRealm very successfully to enable my robot to track moving colored obj... |
18 year | 4 | 3105 |
|
Internet Camera: DCS-2100G [6]
It is working. Thank you very much. Setting the capture to ASAP, I get an average of 4.7 fps over t... |
16 year | 9 | 3120 |
|
Internet Camera: DCS-2100G [9]
I suspect the MPEG control is reading directly from the video port on the DCS-2100g. I see from your documentation that I could ... |
16 year | 9 | 3120 |
|
New Post |