Thread | Last post | Posts | Views |
Recognizing angle of blob depends on x line of camera [10]
Marek, So far so good. 2 more steps: 1. Double click on the Object Rec... |
9 year | 13 | 3602 |
Actuators [2]
Eric, As RoboRealm runs on a PC you will most likely need something inbetween the PC and the final ... |
9 year | 2 | 1635 |
Read_HTTP does not read static jpg [4]
Sascha, The image doesn't appear to be the problem. It loads fine even over a webserver. Something ... |
9 year | 7 | 1552 |
Read_HTTP does not read static jpg [2]
Sascha, The module does access jpg images as you specified. Perhaps there is something a bit differ... |
9 year | 7 | 1552 |
Read_HTTP does not read static jpg [7]
Sascha, There were no changes to that module between those versions. You can check the version log:... |
9 year | 7 | 1552 |
serial communication code [2]
Moods, Its a question of formatting. When you specify \255 in the serial interface it knows that be... |
9 year | 4 | 3622 |
using ip camera "onvif protocol" as camera source [4]
Yes, the Read_HTTP can be used with IP cameras that have an MJPEG stream. The url that you need to use can sometimes be found on... |
9 year | 5 | 2240 |
using ip camera "onvif protocol" as camera source [2]
Which camera do you have? We can add an ONVIF module to communicate directly to those supported cam... |
9 year | 5 | 2240 |
Face detection and greyscale video [2]
John, The face_detection module works with gray images. Even with a color image it will convert it ... |
9 year | 2 | 2416 |
USB HID Receive Data Error [8]
Was just trying to test this out with a couple other HID devices. There was an issue that was corrected so it is once again wort... |
9 year | 8 | 4877 |
USB HID Receive Data Error [3]
We tested this out just to see what information is sent when using \50 but it works as expected and didn't find any issues in th... |
9 year | 8 | 4877 |
USB HID Receive Data Error [5]
Thanks for the files. That always helps to understand the flow of information. We found a potential... |
9 year | 8 | 4877 |
NXT-G Return to Starting position [2]
Brian, It is certainly possible to use the encoders to get a rough idea on where you are in the are... |
9 year | 5 | 2662 |
NXT-G Return to Starting position [4]
It would be possible to integrate a RR module to do location estimation using the encoder values from the NXT. Do you know if yo... |
9 year | 5 | 2662 |
refreshing image [2]
If you download the latest you will see a new "Reload file on change" checkbox just below the filename field. If that is selecte... |
9 year | 3 | 2540 |
serial defaults [2]
Roland, The default values for the serial module are somewhat vacant as the Settings fields will be... |
9 year | 2 | 3333 |
Face detect and greet (Fritz) [2]
Ted, If you got that far (you see a green square around your face in the RR window) then that would... |
9 year | 4 | 3256 |
Face detect and greet (Fritz) [4]
It seems that your camera image is not very clear ... how does your face appear in the camera? It might not be easily visible by... |
9 year | 4 | 3256 |
Simulate Long Exposure Time [4]
Pretty cool image! That should be an interesting analysis. What you can also try to do is to put a ... |
9 year | 4 | 2556 |
Simulate Long Exposure Time [2]
The trick to these long exposures is to use something brighter than the background. See attached. Use a flashlight to draw a pic... |
9 year | 4 | 2556 |
|
New Post |