First Posts| Thread | Last post | Posts | Views |
|
Write to EXIF [2]
We added EXIF writing to the write_image module but, unfortunately, we were not able to write the GPS information to the EXIF pa... |
8 year | 2 | 2416 |
|
detect white color? [3]
To detect black color, use the Negative module just before the RGB Filter and then detect white as mentioned above. | 8 year | 3 | 2911 |
|
detect white color? [2]
Select the gray checkbox and increase the min intensity to something like 200 (255 is max). STeven.... |
8 year | 3 | 2911 |
|
versions [2]
The latest version has VERSION and ROBO_PATH, ROBO_FILENAME and ROBO_LABEL variables added. STeven.... |
8 year | 3 | 1812 |
|
HSV and HLS [4]
Opps, you are correct! They were using the same interface (but handling the conversion differently). That's corrected in the lat... |
8 year | 4 | 2364 |
|
HSV and HLS [2]
They are very similar but not exactly the same. H (hue) is the same but S (saturation) is a bit different as well as L (lighting... |
8 year | 4 | 2364 |
|
RR + RIOS SSC 32 [2]
Are you referring to the lynxmotion sequencer program itself or the module in RR that talks to the sequencer? 8 year |
6 |
2144 |
|
|
RR + RIOS SSC 32 [6]
Jean, Can you download the most recent version of RR and give that a try? We found a potential issu... |
8 year | 6 | 2144 |
|
RR + RIOS SSC 32 [4]
Just verified that the module still works with RIOS 1.06 What do you see in the log? I get | 8 year | 6 | 2144 |
|
using C# and Roborealm [2]
This is most likely caused by a mismatch between x32 and x64 versions. You should check what you are compiling to and also use e... |
8 year | 2 | 1674 |
|
AVM navigator and APM 2.5 [4]
Yes, that is certainly possible. The AVM module creates those variables with the expectation of another module using those value... |
8 year | 5 | 2471 |
Depth sensor to RR [3]
Pool photo attached. | 8 year | 3 | 1625 |
|
Depth sensor to RR [2]
While there are modules for the Kinect and senz3D devices (not to mention just using an IR or Sonar sensor on an Arduino) I don'... |
8 year | 3 | 1625 |
|
Suitability question [2]
Allan, Yes, that is possible. There are various ways to accomplish this depending on what tolerance... |
9 year | 2 | 1581 |
|
Combine 2 different pipeline [6]
Nurul, I would use the found circle to test the intensity of the resulting detected cell (perhaps u... |
9 year | 18 | 3511 |
Combine 2 different pipeline [11]
Nurul, Attached is the mean intensity example. 133 versus 112 seems to be significant enough to det... |
9 year | 18 | 3511 |
Combine 2 different pipeline [4]
Nurul, Attached is a single robofile that will detect the embryo in both images. The trick is to no... |
9 year | 18 | 3511 |
|
Combine 2 different pipeline [2]
Can you include that robofile here so we can see what perhaps the issue might be? I'm assuming you ... |
9 year | 18 | 3511 |
|
Combine 2 different pipeline [18]
Nurul, The first step is to check that the servo moves by using the GUI interface of the Dynamixel ... |
9 year | 18 | 3511 |
|
Combine 2 different pipeline [8]
Nurul, I'm not 100% sure what you mean by "trace them with different shapes". I'm going to assume t... |
9 year | 18 | 3511 |
|
New Post |