Thread | Last post | Posts | Views |
exporting variables [2]
BT, First, download the latest version of RR so we can be sure you are seeing what our tests reveal... |
10 year | 2 | 2961 |
parallel port [3]
You have it about right ... I'd remove the FACE_COUNT from pins 3,4,5 since you are not using those and just keep the FACE_COUN... |
10 year | 3 | 2702 |
Bluetooth serial port timeout [3]
Geza, We had re-reviewed the serial module when we introduced the ser2net capabilities and found a ... |
10 year | 3 | 2929 |
Analog input [2]
Kevin, I'm not sure what the issue might be with the image recognition ... if you can include that... |
10 year | 2 | 2099 |
RR unable to write files [2]
Marco, Most definately a permissions issue. Its possible that the permissions allow for creation bu... |
10 year | 2 | 2542 |
Blob filtration based on logic [2]
Dawson, It seems that blob 2 is actually closer to X than blob1 .. but if we lower the X mark then ... |
10 year | 3 | 2672 |
Nearest blob to refference line [2]
Dawson, We added NearestX and NearestY attributes to the blob filter. Give it a try. ... |
10 year | 3 | 2592 |
tracking IR-LEDs [2]
Martin, Assuming you just want to track the PCB that's certainly possible just using illumination ... |
10 year | 2 | 2546 |
Image overlap [2]
Dexter, Its certainly possible to do ... we've actually done something similar (comparing pages fr... |
10 year | 2 | 2529 |
seeking suggestion [2]
Peter, The best generic way to detect obstacles is using some form of depth sensor. Inside you can ... |
10 year | 2 | 2331 |
the magic behind Fiducial [2]
There are many different ways to do that. If you are interested in the behinds the scenes way, take a look at the ARTookit | 10 year | 2 | 2712 |
Display Text Module [2]
Nemanya, The variable selection was built to deal correctly with arrays ... but this has been updat... |
10 year | 2 | 2296 |
Creating an output [2]
Kris, Start with building a test environment (can be approximate), get both balls and simulate what... |
10 year | 2 | 1552 |
Array Declaration Error [2]
Try using ReDim myArray(29) instead. It has to do with the way the mod... |
10 year | 2 | 2052 |
Button interface to activate tabs [2]
Mai, You would use the Call tab to do this. See the attached. Press a button to run different tabs.... |
10 year | 2 | 2969 |
Line Following sensor [2]
Goupil, The company no longer exists. Some of the folks moved over to cmRobot but I don't think th... |
10 year | 2 | 1560 |
Serial communication from colour filter [2]
Kris, Can you post a image of what you would expect to see from the camera? | 10 year | 2 | 1548 |
take photo [2]
Do you have a sample image of those two red balls? And perhaps one with only one? STeven.... |
10 year | 3 | 3013 |
xtion range data [3]
Dave, That makes sense. Its probably a good candidate to put results into an array. The latest vers... |
10 year | 4 | 1673 |
program expires with payment made [2]
Martin, If you download the application once more from the url that you were provided you will noti... |
10 year | 2 | 2236 |
|
New Post |