First Posts| Thread | Last post | Posts | Views |
|
Socket Server [13]
Wongfeirang, Yes, that fix would have applied to the USB HID module too. I've checked for any delay... |
9 year | 15 | 3501 |
|
Socket Server [15]
We removed the changes we added when this was first identified as an issue. So the 2 second delay should be removed and back to ... |
9 year | 15 | 3501 |
|
Socket Server [2]
Wongfeirang, Go ahead and download the latest version. We tested a couple other UDP tools and found... |
9 year | 15 | 3501 |
|
Socket Client data to Variable [6]
Try removing the Set Speed = "" in the second line of the pipeline. :-) Or at least select the "set... |
9 year | 8 | 3771 |
|
Socket Client data to Variable [4]
Ok, did you try adding the receive sequence mentioned above to the Socket Client module? I don't see that in your attached robof... |
9 year | 8 | 3771 |
|
Socket Client data to Variable [2]
Steve, Its a bit tricky since you want to extract out the middle field. There was a way to do this ... |
9 year | 8 | 3771 |
|
Socket Client data to Variable [8]
Normally that's a good thing! The reason the "set once" checkbox is there is for initialization. Otherwise, RR is a 'declared wh... |
9 year | 8 | 3771 |
|
hardware needed [2]
It should just function fine on a regular PC unless you have a large video image (> 640x480). See | 9 year | 2 | 2150 |
|
Roborealm Purchase [2]
Append &v=2.77.10 to your download URL (once purchased as this does NO... |
9 year | 2 | 1789 |
|
AUV [8]
Yes, the motors will most likely react to the PWM signal ... thus the 500 to 2500 range. Note, 1000... |
9 year | 11 | 3248 |
|
AUV [6]
Have you written a quick Arduino Sketch that sets the values of pin3 and pin9 to 800 and 1000 to see if the motors respond? | 9 year | 11 | 3248 |
|
AUV [10]
Ragronark, Q1: Not sure if that would be the only change. It is certainly the most common since dif... |
9 year | 11 | 3248 |
|
AUV [2]
I'm assuming this is a duplicate/related post for ... |
9 year | 11 | 3248 |
|
AUV [4]
Can you verify that the motors work and that setting those pins on the arduino cause the motors to move? | 9 year | 11 | 3248 |
|
Keyboard Shortcuts [2]
Jeremy, We updated those keystrokes to use F2, F3 and F4 for the 3 tabs (F1 goes to help) as we ran... |
9 year | 2 | 1796 |
|
RoboRealm 64 bit [4]
Mayank, A 64 bit version of the RoboRealm.dll is not available. If you append &b=64 to your downloa... |
9 year | 4 | 1823 |
|
RoboRealm 64 bit [2]
Mayank, We've not had any requests for a 64 bit version but have intended to release a 64 bit versi... |
9 year | 4 | 1823 |
|
How to overlay one pet [2]
Egido, Do you have an example of what you mean? Detecting and identifying animals isn't an easy tas... |
9 year | 2 | 2466 |
|
How to launch second simultaneous instance of RR? [2]
Jeremy, Let's backup for a minute since while this is possible to do I'm not sure why one would. I ... |
9 year | 5 | 2367 |
|
How to launch second simultaneous instance of RR? [4]
Jeremy, I'm not sure if this does what you need but in the Average module | 9 year | 5 | 2367 |
|
New Post |