First Posts| Thread | Last post | Posts | Views |
|
Suitability question [2]
Allan, Yes, that is possible. There are various ways to accomplish this depending on what tolerance... |
10 year | 2 | 2104 |
Depth sensor to RR [3]
Pool photo attached. | 10 year | 3 | 2127 |
|
Depth sensor to RR [2]
While there are modules for the Kinect and senz3D devices (not to mention just using an IR or Sonar sensor on an Arduino) I don'... |
10 year | 3 | 2127 |
|
AVM navigator and APM 2.5 [4]
Yes, that is certainly possible. The AVM module creates those variables with the expectation of another module using those value... |
10 year | 5 | 3218 |
|
using C# and Roborealm [2]
This is most likely caused by a mismatch between x32 and x64 versions. You should check what you are compiling to and also use e... |
10 year | 2 | 2199 |
|
RR + RIOS SSC 32 [2]
Are you referring to the lynxmotion sequencer program itself or the module in RR that talks to the sequencer? 10 year |
6 |
2836 |
|
|
RR + RIOS SSC 32 [6]
Jean, Can you download the most recent version of RR and give that a try? We found a potential issu... |
10 year | 6 | 2836 |
|
RR + RIOS SSC 32 [4]
Just verified that the module still works with RIOS 1.06 What do you see in the log? I get | 10 year | 6 | 2836 |
|
HSV and HLS [4]
Opps, you are correct! They were using the same interface (but handling the conversion differently). That's corrected in the lat... |
10 year | 4 | 3092 |
|
HSV and HLS [2]
They are very similar but not exactly the same. H (hue) is the same but S (saturation) is a bit different as well as L (lighting... |
10 year | 4 | 3092 |
|
versions [2]
The latest version has VERSION and ROBO_PATH, ROBO_FILENAME and ROBO_LABEL variables added. STeven.... |
10 year | 3 | 2574 |
|
detect white color? [3]
To detect black color, use the Negative module just before the RGB Filter and then detect white as mentioned above. | 10 year | 3 | 3852 |
|
detect white color? [2]
Select the gray checkbox and increase the min intensity to something like 200 (255 is max). STeven.... |
10 year | 3 | 3852 |
|
Write to EXIF [2]
We added EXIF writing to the write_image module but, unfortunately, we were not able to write the GPS information to the EXIF pa... |
10 year | 2 | 3179 |
|
Not saving "source" image from C# [2]
Jake, This was our fault. We were using the wrong field name in the RR executable and thus never re... |
10 year | 3 | 2234 |
|
GenICam XML Parse error [4]
Jake, Ok, that doesn't appear to be an invalid character but an incorrect truncation of the data be... |
10 year | 5 | 6218 |
|
GenICam XML Parse error [2]
Jake, That's most likely due to a unicode/high ascii character included in the description that the... |
10 year | 5 | 6218 |
|
roborealm and arduino [2]
Can you post the control code that you tried which worked and the robofile that you currently had loaded into RR? We can then co... |
10 year | 2 | 3318 |
Changes in the image [2]
Lev, See the attached. Note the images are scaled to 320x240 since in these cases of pixel comparis... |
10 year | 3 | 2857 |
|
Virtual camera shows only Roborealm logo [8]
Jeremy, Now I'm a bit confused ... is that screenshot from the version you are using? | 10 year | 12 | 3191 |
|
New Post |