First Posts| Thread | Last post | Posts | Views |
|
navigation by computer vision [5]
Your robofile looks about right. You may need a newline after the move command in the serial module. So that would be more like ... |
10 year | 27 | 6884 |
|
navigation by computer vision [7]
Hemant, That's certainly possible but you will have to record some video to test. Any vision projec... |
10 year | 27 | 6884 |
|
navigation by computer vision [16]
We're not aware of any good economical stereo cameras. Typically we just purchase two reasonably good quality cameras and mount ... |
10 year | 27 | 6884 |
|
navigation by computer vision [2]
What serial protocol are you using? I.e. what commands (like 'f' for forward, 'b' for back) do you need to send over serial? 10 year |
27 |
6884 |
|
|
navigation by computer vision [27]
Hemant, 1. You may find ... |
10 year | 27 | 6884 |
|
navigation by computer vision [9]
Arvind, If you are looking for neural network based learning packages you may be better off with a ... |
10 year | 27 | 6884 |
|
navigation by computer vision [14]
Arvind, "I can get distance or depth of any object in order to avoid collisio... |
10 year | 27 | 6884 |
|
navigation by computer vision [18]
Hemant, In theory that is a 1394 camera. If you don't have one of those firewire ports on your mach... |
10 year | 27 | 6884 |
|
Basler Camera II [4]
Pete, Can you send us the Raw XML? You can paste it into this site's contact form and just send it... |
12 year | 17 | 6871 |
|
Basler Camera II [2]
Pete, Two possibilities here: 1. From what you describe, we had simi... |
12 year | 17 | 6871 |
|
Basler Camera II [15]
Pete, The configuration is being received because your system probably allows inbound traffic over ... |
12 year | 17 | 6871 |
|
Basler Camera II [10]
Pete, I think there might be a conflict with the Balser drivers. Ironically, I was unable to instal... |
12 year | 17 | 6871 |
|
Basler Camera II [8]
Pete, There are a couple things we can try ... but it would be easiest to test those on the actual ... |
12 year | 17 | 6871 |
|
GenICam XML Parse error [2]
Jake, That's most likely due to a unicode/high ascii character included in the description that the... |
11 year | 5 | 6746 |
|
GenICam XML Parse error [4]
Jake, Ok, that doesn't appear to be an invalid character but an incorrect truncation of the data be... |
11 year | 5 | 6746 |
|
USB HID Receive Data Error [3]
We tested this out just to see what information is sent when using \50 but it works as expected and didn't find any issues in th... |
11 year | 8 | 6233 |
|
USB HID Receive Data Error [5]
Thanks for the files. That always helps to understand the flow of information. We found a potential... |
11 year | 8 | 6233 |
|
USB HID Receive Data Error [8]
Was just trying to test this out with a couple other HID devices. There was an issue that was corrected so it is once again wort... |
11 year | 8 | 6233 |
|
Stereo (stereoscopic) Vision object detection [2]
Brenden, There are a couple of possibilities. You can certainly try using the Stereo module to get ... |
13 year | 7 | 6219 |
|
Stereo (stereoscopic) Vision object detection [4]
Brenden, What you'd need to do is to take images from all sides of the object as part of the recog... |
13 year | 7 | 6219 |
|
New Post |