First Posts| Thread | Last post | Posts | Views |
|
pololu servo control via xbee [10]
Sparky-marc, I did try the pololu mode and it didn't seem to work. Most likely the baud rate wasn\... |
13 year | 11 | 5342 |
|
pololu servo control via xbee [4]
Seems to work for us if you set it in Mini SSC mode (there is a checkbox for that in the interface). If it doesn't move, exit R... |
13 year | 11 | 5342 |
|
pololu servo control via xbee [2]
Sparky, Have you tried using the Pololu_SSC module for this? The maestro module specifically uses U... |
13 year | 11 | 5342 |
|
Advantech I/O board support [2]
Tomasz, Yes, it is possible to support boards like these ... but we do not have the time or resourc... |
13 year | 3 | 2787 |
|
RR keeps crashing, no historogram, out-of-memory error / win7 pro 64bit [4]
Tomasz, I think we found the issue. Indeed it was related to the drawing of the histogram graph in ... |
13 year | 6 | 4128 |
|
RR keeps crashing, no historogram, out-of-memory error / win7 pro 64bit [2]
Tomasz, thanks for your emails and error reports. Give us a bit to check them out and see if we can... |
13 year | 6 | 4128 |
|
NXT isn't receiving messages [3]
Could you post both your NXT and robofile so we can try to replicate? Thanks, STeven.... |
13 year | 5 | 3837 |
|
NXT isn't receiving messages [6]
We just verified that this is working just fine at least on the most recent version of RoboRealm. What version are you all using... |
13 year | 5 | 3837 |
Saving images [4]
Annika, Thanks for the images. I noticed 2 issues in the robofile: 1. ... |
13 year | 4 | 4334 |
|
Saving images [2]
Annika, Its hard to say what is going wrong without the python application that you are using to do... |
13 year | 4 | 4334 |
|
Output C/C++ [4]
Grant, Just to clarify: 1. Automatically create a source C/C++ file th... |
13 year | 4 | 2716 |
|
Output C/C++ [2]
Grant, It is possible but only with a lot of work. RoboRealm is deceptively simple in that it hides... |
13 year | 4 | 2716 |
|
Switch on/off Serial Module [2]
John, Just to clarify, what you are asking for is if it is possible to pause the serial module from... |
13 year | 4 | 2780 |
|
Switch on/off Serial Module [4]
John, I think you need a single \\ in the receive sequence as in \\[C... |
13 year | 4 | 2780 |
|
Detecting feature [3]
Roland, Yes, you can use the black part as an anchor and then detect the light level of the screw r... |
13 year | 3 | 3829 |
|
Crashing [4]
Robert, Go ahead and download the most recent version which should take care of the camera error. <... |
13 year | 6 | 2674 |
|
Crashing [2]
Robert, We noticed one error from an XP system that appeared to be within Windows. Is there somethi... |
13 year | 6 | 2674 |
|
Crashing [6]
Thanks for the update. It does seem to be an issue with something within windows. Unfortunately we are not seeing that problem o... |
13 year | 6 | 2674 |
|
Switching cameras [2]
Rather than fix it in hardware just select one camera using the main Camera button and Options Video tab, and then use the Marke... |
13 year | 2 | 2742 |
|
Cannot start Roborealm [7]
Roland, Glad that worked out. Specifically you were probably missing the Visual C runtime libraries... |
13 year | 7 | 2715 |
|
New Post |