Thread | Last post | Posts | Views |
RoboRealm Propeller MCU Examples / Help Needed [5]
STeven, Possibly, let me mess with it and reach back out if / when it does not work. I'm accustomed to... |
10 year | 17 | 3449 |
RoboRealm Propeller MCU Examples / Help Needed [16]
STeven Using RR version 2.50.44 See attached image. | 10 year | 17 | 3449 |
Zmodo Cameras [5]
I got RTSP module to load, but No Joy on the Zmodo camera connection with RR. I'm a low grade novice amature when it ... |
7 year | 5 | 3397 |
Zmodo Cameras [3]
STeven Here: ... |
7 year | 5 | 3397 |
Zmodo Cameras
STeven, For my wired to my router FOSCAM camera I successfully use the URL you suggested: | 7 year | 5 | 3397 |
Speed Trap Application [5]
STeven, A your recommendation I used the crop and movement modules to crop and detect movement in the cropped regi... |
9 year | 9 | 3052 |
Speed Trap Application [3]
STeven, What you describe as a multi-camera system makes sense. I have reviewed the help section regard... |
9 year | 9 | 3052 |
Speed Trap Application
It’s been a while since I have played with RR. My family and I relocated from Chicago to Atlanta and that pretty muc... |
9 year | 9 | 3052 |
Speed Trap Application [9]
STeven, Thank You! Steve... |
9 year | 9 | 3052 |
Speed Trap Application [7]
OK, I've gotten this far and I think I basically understand the marker module. Now I need to start a timer when one ... |
9 year | 9 | 3052 |
Saving AVI [3]
STeven, I reserve the right to be wrong. After taking the time to experiment with the Write avi module ... |
8 year | 7 | 2724 |
Saving AVI
STeven, I'm trying to set up a fixed time record based upon a condition of a certain variable SPEED. Th... |
8 year | 7 | 2724 |
Saving AVI [6]
STeven, Ignore last two posts, unless you want to memorialize the exercise. I've taken a simplified app... |
8 year | 7 | 2724 |
Saving AVI [5]
STeven, I got a visit from the idea fairy tonight. Want to include the fastest speed recorded from one ... |
8 year | 7 | 2724 |
Saving AVI [4]
STeven, I put a bit of skin in the game here. Attached is my attempt, but it does not appear to be work... |
8 year | 7 | 2724 |
Bug?
When I try to activate the MCU module RR all but locks up. Frame rate drops to <1 fps. Am I doing somet... |
9 year | 8 | 2705 |
Bug? [6]
STeven, I have verified the pins 31 RX 30 TX , the baud rate 115200, and the COM port with no success.&... |
9 year | 8 | 2705 |
Bug? [4]
STeven, On the chance that maybe the problem is hardware specific, I grabbed a different Prop board (Demo Board), ... |
9 year | 8 | 2705 |
Bug? [3]
Propeller chip and RR 2.59.2 got it to work once while running Propeller Communicator and even then the frame rate... |
9 year | 8 | 2705 |
ESP8266 [2]
Below is the sample code that is loaded into the ESP8266 using the Arduino IDE. The temp sensor dat... |
7 year | 3 | 2032 |
|
New Post |