Thread | Last post | Posts | Views |
AVM Map dont work [30]
>> I just send my command and look in the variable, NV_FORWARD jumps from 0 to 1 and back again. With the activated AVM Na... |
12 year | 38 | 7901 |
AVM Map dont work [13]
Thank you for good idea! I will think over your proposal with named waypoints.... |
12 year | 38 | 7901 |
AVM Map dont work [29]
All you needed to control AVM Navigator is transmission of "-1" value to variables NV_FIRE, NV_LEFT, NV_RIGHT, NV_FORWARD, NV_... |
12 year | 38 | 7901 |
AVM Map dont work [10]
Some variables of AVM Navigator module is used for input (with prefix _IN): NV_IN_SET_MODE - the cu... |
12 year | 38 | 7901 |
AVM Map dont work [8]
Unfortunately but now there is no way for notification of AVM Navigator about motion control from external application. I will k... |
12 year | 38 | 7901 |
AVM Map dont work [25]
You should just remove Set_Variables module from pipeline and then set NV_FORWARD variable from your external program and furthe... |
12 year | 38 | 7901 |
AVM Map dont work [39]
First you should just try to review my simple video tutorial "Route training and navigation by map" on your robot: ... |
12 year | 38 | 7901 |
AVM Map dont work [6]
What if you try to train with "AVM Quake 3 mod" for acquaintance with "Marker mode" and "Navigation by map" modes? | 12 year | 38 | 7901 |
AVM Map dont work [24]
I had in mind to check status before AVM Navigator in pipeline because after AVM module this value was changed: 12 year |
38 |
7901 |
|
AVM Map dont work [37]
The double purpose of control variables (in/out functions) is already implemented since as AVM Navigator v0.7.2.3 was released. ... |
12 year | 38 | 7901 |
AVM Map dont work [5]
You should use arrow keys for robot control in "Marker mode" (it is important for route recording) but it seems (from your ima... |
12 year | 38 | 7901 |
AVM Map dont work [22]
Can you insert "Contents\\Variable\\Watch_Variable" module before AVM Navigator module and check value of NV_FORWARD variable ... |
12 year | 38 | 7901 |
AVM Map dont work [35]
>> I'll load it up and try it. Which reminds me, where exactly do I load VBscript? First you... |
12 year | 38 | 7901 |
AVM Navigator variables [7]
Navigator plugin was updated and new variables was added: -== Module control variable ==- | 12 year | 22 | 6422 |
AVM Navigator variables [21]
Navigator plugin was updated and new variable was added: NV_CHECKPOINT_NOW - indicates the checkpoi... |
12 year | 22 | 6422 |
AVM Navigator variables [20]
>> My robot seems to follow gates if they are in a straight line. >> How much of a turn can be made be... |
12 year | 22 | 6422 |
AVM Navigator variables [23]
* What your robot see and how it affect to navigation? In our case the robot uses only limited sequ... |
12 year | 22 | 6422 |
AVM Navigator variables [19]
Can you provide source video that would be used in recognition with AVM? I would try to test it and... |
12 year | 22 | 6422 |
AVM Navigator variables [17]
It would be useful for comparison with regard to AVM if you also will share your results with testing SentiSight algorithm (vide... |
12 year | 22 | 6422 |
AVM Navigator variables [4]
Navigator plugin was updated. Now you can redownload the RoboRealm package for getting changes. The... |
12 year | 22 | 6422 |
|
New Post |