loading
 
Request to increase VCam limit to 8
David from New Zealand  [4 posts]
7 months
Hi Steven,

We have a high speed sorting/positioning application which uses four Basler USB 3.0 cameras connected to a 12-core Intel i9 PC. The video stream from each camera is segmented into three regions and the image processing pipeline for each region is assigned to a separate core. This is necessary to maintain an inspection rate of 41fps. Currently, we have two cameras operating which use all four VCam's in RoboRealm. We require four additional VCams to fully commission the system and complete this project. Please could you increase the number of VCams to eight so we can run all four cameras?
Steven Gentner from United States  [1407 posts] 7 months
Extending this feature is not on our short term roadmap.  Windows 10 has the VCam feature built in, so that may help.  Basler would need to do a DirectX driver for their cameras for that to work.

This forum thread has been closed due to inactivity (more than 4 months) or number of replies (more than 50 messages). Please start a New Post and enter a new forum thread with the appropriate title.

 New Post   Forum Index