loading
16 posts
ThreadLast postPostsViews
pololu miro-maestro is not discerned [2]
Hi, I bought the licence of the last roborealm version and I have a problem with pololu micro-maestro.
6 years 32 6519
pololu miro-maestro is not discerned [4]
Hello STEVEN, thank you very much for your indication. I recharged the last version in 2.42.21.0 and servos answe...
6 years 32 6519
pololu miro-maestro is not discerned [5]
Hello STEVEN, I perhaps badly expressed myself. When I link servos on COG, they both leave in extr...
6 years 32 6519
pololu miro-maestro is not discerned [7]
Helle STeven I installed your script, here is data were acquired in variables: - IMAGE_WIDTH = 320 ...
6 years 32 6519
pololu miro-maestro is not discerned [8]
Hello STeven I thought of making this modification: halfWidth = GetVar...
6 years 32 6519
pololu miro-maestro is not discerned [10]
Thank you very much, STeven. jacques...
6 years 32 6519
pololu miro-maestro is not discerned [11]
STEVEN Desolate to insist, but I paid a licence and I would like I shall manage my plan.
6 years 32 6519
pololu miro-maestro is not discerned [13]
STEVEN Now it is clear. Ok, this walks with Scale_variables! Now, how...
6 years 32 6519
pololu miro-maestro is not discerned [16]
Hi It is what would explain that servos always leaves in extreme position at the end of some seconds?
6 years 32 6519
pololu miro-maestro is not discerned [18]
STeven I have a feeding 5 volts - 4,8 Amperes to feed servos and plate maestro. I do not have fall of voltage.
6 years 32 6519
pololu miro-maestro is not discerned [21]
Hi STEVEN and Petr I discover that I have no same system of control which you put in picture? Howe...
6 years 32 6519
pololu miro-maestro is not discerned [22]
Hi STeven and Petr an anomaly: here is my program in picture 1. Here are two scalX ...
6 years 32 6519
pololu miro-maestro is not discerned [25]
STEVEN you really have a lot of patience! I prefer reaching with you the file, I th...
6 years 32 6519
pololu miro-maestro is not discerned [28]
Hello Steven I do not have the decimal figures anymore. But I always have this disp...
6 years 32 6519
pololu miro-maestro is not discerned [30]
STeven If I use only with the variable Tilt servo2 is curious? Because the Pan also ...
6 years 32 6519
pololu miro-maestro is not discerned [31]
error: If I use only with the variable Pan servo1, there are the same movements. ...
6 years 32 6519

  1  
 New Post