loading
47 posts
ThreadLast postPostsViews
Copy Cut and Paste
I tried unsuccessfully to search the forum for the answer to this question, and I cannot be the first to ask:
11 year 2 2458
ESP8266 [2]
Below is the sample code that is loaded into the ESP8266 using the Arduino IDE. The temp sensor dat...
8 year 3 2950
ESP8266
STeven, Are you familiar with the ESP8266 wifi chip? I have Arduino code that I load into an 8266 ch...
8 year 3 2950
ESP8266 [3]
Attached is my lame attempt to get this off the ground.  I can make a socket connection at 192.168.1.2:80 and I am try...
8 year 3 2950
Bug?
When I try to activate the MCU module RR all but locks up.  Frame rate drops to <1 fps.  Am I doing somet...
11 year 8 3594
Bug? [6]
STeven, I have verified the pins 31 RX 30 TX , the baud rate 115200, and the COM port  with no success.&...
11 year 8 3594
Bug? [4]
STeven, On the chance that maybe the problem is hardware specific, I grabbed a different Prop board (Demo Board), ...
11 year 8 3594
Bug? [3]
Propeller chip and RR 2.59.2 got it to work once while running Propeller Communicator and even then the frame rate...
11 year 8 3594
Saving AVI [3]
STeven, I reserve the right to be wrong.  After taking the time to experiment with the Write avi module ...
10 year 7 3774
Saving AVI
STeven, I'm trying to set up a fixed time record based upon a condition of a certain variable SPEED.  Th...
10 year 7 3774
Saving AVI [6]
STeven, Ignore last two posts, unless you want to memorialize the exercise.  I've taken a simplified app...
10 year 7 3774
Saving AVI [5]
STeven, I got a visit from the idea fairy tonight.  Want to include the fastest speed recorded from one ...
10 year 7 3774
Saving AVI [4]
STeven, I put a bit of skin in the game here.  Attached is my attempt, but it does not appear to be work...
10 year 7 3774
Speed Trap Application [5]
STeven, A your recommendation I used the crop and movement modules to crop and detect movement in the cropped regi...
11 year 9 4075
Speed Trap Application [3]
STeven, What you describe as a multi-camera system makes sense.  I have reviewed the help section regard...
11 year 9 4075
Speed Trap Application
It’s been a while since I have played with RR.   My family and I relocated from Chicago to Atlanta and that pretty muc...
11 year 9 4075
Speed Trap Application [9]
STeven, Thank You!   Steve...
11 year 9 4075
Speed Trap Application [7]
OK, I've gotten this far and I think I basically understand the marker module.   Now I need to start a timer when one ...
11 year 9 4075
RoboRealm Propeller MCU Examples / Help Needed [3]
STeven, Thank you for the prompt reply.  As an introduction, I am a “gear head” by nature and have limit...
12 year 17 4465
RoboRealm Propeller MCU Examples / Help Needed [14]
STeven, This is what happens when newbies get messing around in code they do not fully understand.  I se...
12 year 17 4465

  1 2  3    Next »
 New Post