First Posts| Thread | Last post | Posts | Views |
|
Object strobing [2]
If i strobe an object (at a fixed frequency) in a scene, can roborealm mask out the scene leaving only the area of the strobing ... |
14 year | 9 | 3918 |
|
Directional close [2]
Hi Steven, Is it possible in the Close module to have a feature that allows the user to close in ei... |
13 year | 9 | 3503 |
|
Directional close [10]
Yes the directional symmetrical open is also very useful. Thanks.... |
13 year | 9 | 3503 |
|
Directional close [9]
Is there a way that the close function can work on a wider range. For example if a high value is given the maximum expansion is ... |
13 year | 9 | 3503 |
|
Directional close [8]
I used I big dilate value because I was worried that if the blobs were further apart it would not close. What value do you recom... |
13 year | 9 | 3503 |
|
Object strobing [10]
STeven Yes you are right. Surface reflection, texture and color pose major problems. I might be bet... |
14 year | 9 | 3918 |
|
Directional close [7]
My apologies. The close value I was using was way too high i.e. symmetrical horizontal close at value 14. I reduced it to value ... |
13 year | 9 | 3503 |
|
Object strobing [9]
STeven, Yes and the fact that the robot (and the camera) is moving complicates things further (not ... |
14 year | 9 | 3918 |
|
comparing the color of two blobs [8]
Hi STeven, The following is an example of a problem i am trying to solve. There are 5 blobs. 3 are ... |
14 year | 8 | 3797 |
|
comparing the color of two blobs [7]
Hi STeven, The problem was that i sampled a large area instead of a small area. I did that the firs... |
14 year | 8 | 3797 |
|
comparing the color of two blobs [9]
I will use the color statistics module to get the blob color data. Thanks.... |
14 year | 8 | 3797 |
|
comparing the color of two blobs [5]
I have been testing the program and i am getting inconsistent results Around 5.0 E-2 for similar colors | 14 year | 8 | 3797 |
|
comparing the color of two blobs [4]
STeven Yes that works fine. I wasn't sure how to do the comparison and if i would have to use the ... |
14 year | 8 | 3797 |
|
comparing the color of two blobs [2]
Hi STeven, I would like to compare the color of two blobs and determine if they are both of a simil... |
14 year | 8 | 3797 |
|
Trapezium crop [6]
On the other-hand if i applied a mask and did an edge detection, the edges of the mask will also be detected. Could i apply an a... |
14 year | 7 | 5480 |
|
Trapezium crop [5]
Thanks. ANDing the image with a mask should do the job.... |
14 year | 7 | 5480 |
|
Trapezium crop [3]
sorry let me elaborate, as the distance gets further the object or scene (like a road or pavement or corridor) gets smaller due ... |
14 year | 7 | 5480 |
|
Trapezium crop [2]
Hi STeven, Is it possible to crop trapezium shapes? As the area gets smaller due to perspective, i ... |
14 year | 7 | 5480 |
|
Trapezium crop [8]
Yes you are right :D (i initially thought i could not follow that sequence..... but on second thought i probably can)... |
14 year | 7 | 5480 |
Blob split feature expansion [3]
Hi Steven, The red line indicates roughly where i want the split to occur.... |
12 year | 6 | 3566 |
|
New Post |