Thread | Last post | Posts | Views |
Robo Claw 2x24 motor controller [2]
I have a Sabertooth 2x24 and 2x50 motor drivers which work well with the Dimension Engineering/Sabertooth module. ... |
13 year | 1 | 2251 |
Sonar Sensors [5]
To use an Arduino with RR, a standard protocol is required to communicate data packets specific to an Ultrasonic unit. Some comm... |
12 year | 4 | 2501 |
GardenBot [5]
Steven, Thanks! I do have a pan/tilt on the camera. When the Pan is past the deadband... |
12 year | 4 | 5371 |
GardenBot [2]
One of my many projects is a robot I call “The GardenBot”. I’m building this for my wife, Carol to work around the ya... |
12 year | 4 | 5371 |
Now AVM is working faster [3]
That is GREAT! Thanks for your hard work! I look forward to testing it. DM... |
12 year | 117 | 21717 |
Underwater ROV serial communication and other questions [3]
Andrew, This may not be the best forum for your ROV questions. Roborealm is more for computer vision-based applica... |
12 year | 5 | 5941 |
Underwater ROV serial communication and other questions [5]
Andrew, You are most welcome. Brushless motors are great for speed, but lack in touque unless adpted... |
12 year | 5 | 5941 |
Arduino Mega + two Futaba Servos + RoboRealm = Pan/tilt object following. [6]
see if this is what your are attempting. I can send you the code. ... |
11 year | 9 | 4360 |
Arduino Motor Control [11]
I was able to program both ball and a bucket tracking system. Look at my youtube "Scruffman2001" and watch the "Ga... |
9 year | 12 | 3608 |
|
New Post |