First Posts| Thread | Last post | Posts | Views |
|
Robotics Connection Serializer V3 Servo Problem [2]
Connected a couple of Hitec servos to the Robotics Connection Serializer V3 board (may be a similar issue to V2 of the same boar... |
14 year | 2 | 3702 |
|
Traxster II Module + Serial Communication [6]
STeven, Yeah! Perfecto! This works great, thank you so much for the addition.... |
15 year | 6 | 4757 |
|
Traxster II Module + Serial Communication [4]
Hi. Thanks for the reply. A generic I2C read/write capability would give me the most opt... |
15 year | 6 | 4757 |
Traxster II Module + Serial Communication [2]
I'm using a Traxster II chassis with a Serializer WL 3.0 controller from Robotics Connection with RoboRealm (purchased). &... |
15 year | 6 | 4757 |
|
Small Bug with Blob Filter [2]
The updated Blob Filter module in v2.14.7 has a dialog that pops up whenever I start RoboRealm that says "Font format error on ... |
15 year | 2 | 2589 |
|
TRENDnet TV-IP422W PTZ Camera [6]
Hi, I installed the 2.11.10 build of RR and the pan/tilt controls are enabled with the IP422W camer... |
15 year | 13 | 6244 |
|
TRENDnet TV-IP422W PTZ Camera [5]
Hi--there are no mechanical zoom capabilities, just a 1x, 2x, or 3x digital zoom. I was looking for... |
15 year | 13 | 6244 |
|
TRENDnet TV-IP422W PTZ Camera [13]
Having lots of fun with the new 422W driver--thanks again. I have been noticing that (1) after a period of time, Robo... |
15 year | 13 | 6244 |
|
TRENDnet TV-IP422W PTZ Camera [12]
Hi--not a code from the video point of view. The speed-up is mainly the Robotics Connection Traxster and VBscript eng... |
15 year | 13 | 6244 |
|
TRENDnet TV-IP422W PTZ Camera [10]
Well, I purchased RR, because how can one beat this environment even for testing out "things." Ye... |
15 year | 13 | 6244 |
|
TRENDnet TV-IP422W PTZ Camera [7]
Forgive me! I didn't really understand what the "group" setting meant, and as I took a shower it dawned on me that... |
15 year | 13 | 6244 |
|
New Post |