No Title

Tue, 30 Nov 1999 00:11:00 EST

Tomytha,

Not sure exactly why you tried ser2Net as that has more to do with command control rather than video streaming. I assume the Logitech is plugged in the Raspberry PI which then makes it very similar to what you do with the TP-Link router ... which is discussed in depth at

http://www.roborealm.com/forum/index.php?thread_id=5163

I'd take a look at that and instead use the HTTP Read module in RR along with running mjpg_streamer on the PI.

STeven.

Roborealm+Raspberrypi+MJpg_video_streaming

Tue, 30 Nov 1999 00:11:00 EST

Hello,

I am trying to get a video feed into RoboRealm via Raspberry pi and Logitech camera which is configured to MJPG video streaming using IP address and Port number.

I am unsure as to what option to chose. The API server or Ser2Net.

I have tried to use the Ser2Net but installing it on the Raspberry Pi but having difficultes to set the port number, data bits parity etc. I am not able to get much online help on this either since it is too specific.

Your help would be much greatful !

Thanks,
Tomytha

RoboRealm Forum

No Title

Roborealm+Raspberrypi+MJpg_video_streaming