No Title

Tue, 30 Nov 1999 00:11:00 EST

Roger,

Unfortunately your issue is not related to RoboRealm. It looks like you will need to download the device driver for whatever you are using to connect the PIC to the PC. You should check with the vendor of the cable you are using to connect the PIC to the PC. Typically they will supply the needed drivers to correctly register the cable as a virtual COM port based on their hardware.

If your device is not recognized by the device manager there is no way for RoboRealm to recognize it either.

STeven.

Problems interfacing a PIC18F2455

Tue, 30 Nov 1999 00:11:00 EST

Hi im triyn to use a PIC18F2455 IN cdc mode (as a virtual COM port)

when i use serial module of roborealm, my device is never recognized, so my question is:

in case that my code in the pic is correct, is there any bug, patch, or dll to use for roborealm, to recognize that device?

or is it enough whit MPUSBAPI.DLL ?

THANKS ANY HELP IS WELCOME

MY PROBLEM IS THAT MY DEVICE ISN`T RECOGNIZED EVEN BY DEVICE MANAGER OF THE CONTROL PANEL

BYE THANKS

RoboRealm Forum

No Title

Problems interfacing a PIC18F2455