RoboRealm Forum

No Title

Tue, 30 Nov 1999 00:11:00 EST

Jks,

You have to use the get_ror_var_tester.vi to run. You will need to configure the Port to 6060 and ensure that RR is activated and has the API enabled and set to port 6060 too.

The TCP Write error is due to the connection ID not being initialized to an open socket. That is done in the _tester.vi which calls what you are running.

STeven.

No Title

Tue, 30 Nov 1999 00:11:00 EST

I know this thread is old but I'm having problems getting this to work. I get an error in the VI and im not quite sure why. When I test the API I am getting increasing image count numbers and the VI says no errors in but I get TCP Write in get_ror_var.vi in the output. Do I just have somthing in the wrong location or what is the deal? Thanks if anyone responds to this.

No Title

Tue, 30 Nov 1999 00:11:00 EST

heres the latest program.

use get_ror_var.vi to fetch any variable from roborealm and use it directly in labview. You can e-mail questions to:

da8374nek2390etn5860er@gmail.com (please remove numbers first!)
get_ror_var.zip

No Title

Tue, 30 Nov 1999 00:11:00 EST

Robot_food,

Actually we would like to include your vi programs along with our Labview API download as that might be the most appropriate place! Is that ok with you?

If so could you use the contact form and send us a quick email? We'd like to return the favor.

Thanks!
STeven.

No Title

Tue, 30 Nov 1999 00:11:00 EST

actually, this post probably should be moved to the relevant thread

labview connect to roborealm

Tue, 30 Nov 1999 00:11:00 EST

I hope this vi helps you folks who are trying to retrieve roborealm variables and use them in labview. This program plots a red dot corresponding to COG_X and COG_Y and also COG_BOX_SIZE.
tcp_connect_to_roborealm_final.zip