No Title

Tue, 30 Nov 1999 00:11:00 EST

Steve,

Probably the most convienent way is to use the Blob Filter module and select the Create Blobs Array which will create an array of X,Y coordinates. The reason I suggest the blob filter module to do this is that you will probably want to use it to filter out any small blobs or blobs that you don't want to track anyhow. From here you can use one of the programming modules to execute your above conditional array using the GetArrayVariable("BLOBS").

STeven.

Blob Location

Tue, 30 Nov 1999 00:11:00 EST

We are running a camera and phidgets 888 module.
We are trying to fire a output on the phidgets based on the location or zone of a blob across the web. (4 total equal zones across web)

We were trying

If Blobs >1 and (Blob X location > xxx and < xxx) then
Set Phidgets Out 1

If Blobs >1 and (Blob X location > xxx and < xxx) then
Set Phidgets Out 2

If Blobs >1 and (Blob X location > xxx and < xxx) then
Set Phidgets Out 3

If Blobs >1 and (Blob X location > xxx and < xxx) then
Set Phidgets Out 4

How do we capture a blobs coordinates when a blob appears?

RoboRealm Forum

No Title

Blob Location