RoboRealm Forum

No Title

Tue, 30 Nov 1999 00:11:00 EST

Did you specify the right variables in the SRV GUI interface? I.e. try to track down if the variables left_motor and right_motor are getting created and then specify them in the motor dropdown menus for the SRV. Basically you need to tell the robot what values to react to.

STeven.

No Title

Tue, 30 Nov 1999 00:11:00 EST

Ok,I have got the X as image1 and the information in VBscripe is in the image 2. But the robot did not move. Thank you.

Guo

No Title

Tue, 30 Nov 1999 00:11:00 EST

Guo,

Thats good ... but you will have to be more descriptive with your next problem. "It doesn't work" is just not enough information for us to help you with. Can you be more descriptive?

STeven.

No Title

Tue, 30 Nov 1999 00:11:00 EST

Thank you so much!

There is other question. When I follow the Tutorials of The Obstacle Avoidance and Wall Avoidance,all works well until the VBScript Program. The robot did not move. Hoping for your help.

Guo

No Title

Tue, 30 Nov 1999 00:11:00 EST

You probably want to use the other SRV module. The one with the COM specs is the older model. The newer one is SRV1b which uses the 802.11 TCP/IP connection. Just click on the search tab in RoboRealm and type SRV. Then double click on the SRV1b (note that both modules will show).

STeven.

why can not i connect the RoboRealm with surveyor robot?

Tue, 30 Nov 1999 00:11:00 EST

Hello,
The robot connected with my computer by wireless network connections.But in the RoboRealm there was only com1 and com3 choices and it failed to find the robot. I want to know how should i do? Thank you.

Guo