loading
1502 posts
ThreadLast postPostsViews
pololu servo control via xbee [4]
Seems to work for us if you set it in Mini SSC mode (there is a checkbox for that in the interface). If it doesn't move, exit R...
6 years 11 2750
pololu servo control via xbee [10]
Sparky-marc, I did try the pololu mode and it didn't seem to work. Most likely the baud rate wasn\...
6 years 11 2750
USB HID Receive Data Error [5]
Thanks for the files. That always helps to understand the flow of information. We found a potential...
4 years 8 2742
USB HID Receive Data Error [8]
Was just trying to test this out with a couple other HID devices. There was an issue that was corrected so it is once again wort...
4 years 8 2742
USB HID Receive Data Error [3]
We tested this out just to see what information is sent when using \50 but it works as expected and didn't find any issues in th...
4 years 8 2742
Xbee with Arduino [9]
Techdetect, It seems that you are well on your way to the right solution ... you just need a tidbit...
7 years 10 2712
How to set up and relay trigger with time delay [7]
1. No, nothing to do with releasing memory, everything to do with slight errors in the code. Note t...
6 years 24 2664
How to set up and relay trigger with time delay [14]
Tomasz, I don't think its the PC. I'd not spend any time testing on another PC. If it was the PC,...
6 years 24 2664
How to set up and relay trigger with time delay [20]
The problem with using an image is that you need to define a precise trigger point only once. I.e. in our case, the potato can b...
6 years 24 2664
How to set up and relay trigger with time delay [12]
Yes, that's the problem ... perhaps you don't realize this but in your VBScript you have isPotato...
6 years 24 2664
How to set up and relay trigger with time delay [2]
Tomasz, All of what you are asking about is possible but its best to focus on one problem at a time...
6 years 24 2664
How to set up and relay trigger with time delay [23]
Tomasz, As more CPU's are more common than GPU's RoboRealm is geared to multiple CPU's as appose...
6 years 24 2664
How to set up and relay trigger with time delay [17]
Tomasz, Yes, this looks like its working ... at least on the test images that you sent.
6 years 24 2664
How to set up and relay trigger with time delay [10]
Tomasz, You have to read my posts. What is the shape match confidence ...
6 years 24 2664
GenICam XML Parse error [2]
Jake, That's most likely due to a unicode/high ascii character included in the description that the...
4 years 5 2657
GenICam XML Parse error [4]
Jake, Ok, that doesn't appear to be an invalid character but an incorrect truncation of the data be...
4 years 5 2657
kinect color proportional to depth [3]
Oscar, So what you are asking for is for the RGB pixels to be overlaid ontop of the depth informati...
7 years 2 2555
Defect Detection of No. Plate [5]
If you have a known good sample, you should be able to use the same technique to detect scratches. Using the OR or Shape module ...
6 years 7 2553
Defect Detection of No. Plate [3]
Attached is one way to do this .. but its probably not what you need. The reason for this is that your test images appear to be ...
6 years 7 2553
Kinect IR 320x240 [5]
We'll double check things tonight as I know there were issues in the past with that res on the IR camera.
6 years 6 2533

« Prev   1  2  3  4 6  7  8  9  10    Next »
 New Post