1459 posts
ThreadLast postPostsViews
How to Unwarp Image [10]
JHao, There was an issue in the display logic of those points that wasn't taking into account missi...
1 year 10 561
How to Unwarp Image [8]
JHao, Try upgrading to the latest version ... there were additional updates to that module since th...
1 year 10 561
Image processing with roborealm [2]
Romulo, The solution would depend on how the drill bit can be imaged. For example, is it always ass...
1 year 2 227
Detection of motion [2]
You need to determine what device you will use to accept communication from the PC to actually change a voltage level. For examp...
1 year 2 231
How to read an integer array using Modbus? [2]
Marcio, Arrays are not directly supported but can be emulated in a way to get the information out. ...
1 year 2 290
controlling multiple cameras [2]
Charlie, Check first that both cameras individually (depending on what they are looking at) can run...
1 year 2 300
Detection of motion [2]
Play around with the Movement module: ...
1 year 2 287
FRC SmartDashboard Problem [2]
James, What url are you giving the SmartDashboard? Just the basic ...
1 year 2 391
RoboRealm and video stream [4]
FRederick, this is probably the best forum to use for that sort of thing. If you are looking for co...
1 year 7 275
RoboRealm and video stream [2]
Frederick, In theory, yes, it will work. But you will not know for sure until you actually get one ...
1 year 7 275
RoboRealm and video stream [6]
The two local to us that come to mind are Artemis Vision 781 Vallejo St.
1 year 7 275
Digital reader issue [4]
Tomas, Attached is a zip file containing a robofile and the training folder needed for this to work...
1 year 4 372
Digital reader issue [2]
Tomaz, Perhaps you can post a raw unmodified image as would be seen from the camera? And perhaps th...
1 year 4 372
Recognition of B/W Laserscan Targets [2]
You could do crossing lines ... or just find the COG since that will reflect the same position but take into account all pixels ...
1 year 2 331
Navigation Plugin does not stay in .ROBO file [2]
Justin, Its most likely due to the change from being charged to being free which has confused the s...
1 year 3 290
Using RoboRealm through LabVIEW [2]
Jyothish, Yes it is. Please see the API example for the LabView folder downloadable from
1 year 2 301
Write Image Files [2]
Romulo, The simplest way to do this is to surround the Write_Images module using an If_Statement mo...
1 year 2 264
Comparing Folder images [7]
Tim, Seems like you have a couple issues going on here which we can't completely understand without...
1 year 8 563
FRC Camera Client Receives Error When Sending Parameters [6]
That one line should do it ... lower down they explain what this does and instead use 1181 which is different from the default o...
1 year 8 651
Automatic Image Calibration [4]
Charlie, Due to the way the interface is, it will only transform arrays that contain X, Y coordinat...
1 year 5 440

« Prev   1  2  3 5  6  7  8  9  10    Next »
 New Post