First Posts| Thread | Last post | Posts | Views |
|
Detecting feature [3]
Roland, Yes, you can use the black part as an anchor and then detect the light level of the screw r... |
10 year | 3 | 2757 |
Switch on/off Serial Module [2]
John, Just to clarify, what you are asking for is if it is possible to pause the serial module from... |
10 year | 4 | 1953 |
|
Switch on/off Serial Module [4]
John, I think you need a single \\ in the receive sequence as in \\[C... |
10 year | 4 | 1953 |
|
Output C/C++ [4]
Grant, Just to clarify: 1. Automatically create a source C/C++ file th... |
10 year | 4 | 1889 |
|
Output C/C++ [2]
Grant, It is possible but only with a lot of work. RoboRealm is deceptively simple in that it hides... |
10 year | 4 | 1889 |
|
Saving images [4]
Annika, Thanks for the images. I noticed 2 issues in the robofile: 1. ... |
10 year | 4 | 3078 |
|
Saving images [2]
Annika, Its hard to say what is going wrong without the python application that you are using to do... |
10 year | 4 | 3078 |
|
NXT isn't receiving messages [6]
We just verified that this is working just fine at least on the most recent version of RoboRealm. What version are you all using... |
10 year | 5 | 2671 |
|
NXT isn't receiving messages [3]
Could you post both your NXT and robofile so we can try to replicate? Thanks, STeven.... |
10 year | 5 | 2671 |
|
RR keeps crashing, no historogram, out-of-memory error / win7 pro 64bit [4]
Tomasz, I think we found the issue. Indeed it was related to the drawing of the histogram graph in ... |
10 year | 6 | 2921 |
|
RR keeps crashing, no historogram, out-of-memory error / win7 pro 64bit [2]
Tomasz, thanks for your emails and error reports. Give us a bit to check them out and see if we can... |
10 year | 6 | 2921 |
|
Advantech I/O board support [2]
Tomasz, Yes, it is possible to support boards like these ... but we do not have the time or resourc... |
10 year | 3 | 1938 |
|
pololu servo control via xbee [8]
Sparky, Try with just one servo to ensure that you don't have power issues. | 10 year | 11 | 4114 |
|
pololu servo control via xbee [6]
Yes, it does matter. You will need to ((x-500)*255)/2000 in order to convert from 500-2500 range to 0-255 range. ... |
10 year | 11 | 4114 |
|
pololu servo control via xbee [4]
Seems to work for us if you set it in Mini SSC mode (there is a checkbox for that in the interface). If it doesn't move, exit R... |
10 year | 11 | 4114 |
|
pololu servo control via xbee [10]
Sparky-marc, I did try the pololu mode and it didn't seem to work. Most likely the baud rate wasn\... |
10 year | 11 | 4114 |
|
pololu servo control via xbee [2]
Sparky, Have you tried using the Pololu_SSC module for this? The maestro module specifically uses U... |
10 year | 11 | 4114 |
|
batch processing [2]
Annika, You may not have pressed the Start button in the Write Images module ... that's normally t... |
10 year | 3 | 2047 |
|
API C++ error reading COG_X, COG_Y [2]
Nemanya, Yes, that is very possible that the arrays are different if you are using two getVariable ... |
10 year | 3 | 1949 |
Delete arrghh [8]
Its possible that the page differs depending on the country. We see ... |
10 year | 9 | 1936 |
|
New Post |