loading
1460 posts
ThreadLast postPostsViews
Not a JPEG error when using read_HTTP module [21]
Redirecting this to ...
4 years 21 1602
Not a JPEG error when using read_HTTP module [4]
Darathian, Looks like EZrobot doesn't include a content-type tag when returning its HTTP query. Th...
4 years 21 1602
Not a JPEG error when using read_HTTP module [15]
Darathian, Thanks for the test. Those variables (and others like it) have been corrected and should...
4 years 21 1602
Not a JPEG error when using read_HTTP module [2]
What's the url that you are using into EZ? STeven....
4 years 21 1602
Not a JPEG error when using read_HTTP module [9]
Latest version has the sending of arrays using the DefineArray command that you mention. Any idea on how to loop through an exis...
4 years 21 1602
Not a JPEG error when using read_HTTP module [18]
David, Just checking in, I couldn't find anything on the ez-robot site about additional API/SDK pa...
4 years 21 1602
motor speed or tracking speed. [12]
Sam, reviewing the manual I think there are a couple things you can do ... I suggest you become ve...
5 years 15 1592
motor speed or tracking speed. [10]
Sam, Can you start with a clean pipeline (press New) and then check the fps. It should be about wha...
5 years 15 1592
motor speed or tracking speed. [2]
You can try to increase the frequency that you signal the driver ... i.e. how quickly you change the pin values. As RR is based ...
5 years 15 1592
motor speed or tracking speed. [8]
Seems that you do need to increase the pulse frequency. Can you answer my previous question concerning the FPS? <...
5 years 15 1592
motor speed or tracking speed. [15]
Sam, "Does the camera has anything to do with the puls  signal?" - Yes, camera on, you ...
5 years 15 1592
motor speed or tracking speed. [6]
What driver board are you using? Also, are you sure you untoggled the camera button when you set th...
5 years 15 1592
motor speed or tracking speed. [4]
Do you see the FPS number increase as seen in the lower status line in the main RR GUI? There is no...
5 years 15 1592
Sparki sketch [9]
Chuck. How about now? Attached is the reformulated .ino and support files. In this case things are ...
4 years 10 1579
Sparki sketch [7]
Chuck, Unfortunately, the two libraries (the one that work with RR) and what Arcbotics is using is ...
4 years 10 1579
Sparki sketch [2]
David, We had a problem with that file. Can you download that again
4 years 10 1579
Sparki sketch [5]
David, Yea, we used the more typical 0 to 255 with 128 being neutral for the servo sweep.
4 years 10 1579
Barcode decode anomaly [15]
Pete, Thanks for the test. The Genicam module was not paying attention to variables changing. This ...
4 years 15 1576
Barcode decode anomaly [5]
Pete, We've completed our tweaking of the Barcode module specific to the DataMatrix code. Currentl...
4 years 15 1576
Barcode decode anomaly [12]
Pete, On the exposure, what you can do is enter [my_variable] with brackets into the exposure text ...
4 years 15 1576

« Prev   8  9  10  11  12  13 14  15  16  17    Next »
 New Post