loading
1530 posts
ThreadLast postPostsViews
AUV [8]
Yes, the motors will most likely react to the PWM signal ... thus the 500 to 2500 range. Note, 1000...
8 year 11 3040
Fiducials - 32/64 bit windows [10]
Kresimir, The latest improves and up and available for download. From what we can tell this should ...
7 year 11 2376
Bug in OSC module makes it unusable [2]
Yes, there was an issue with an empty array (such as that created by the OR module) would stop other variables from being sent c...
9 year 11 3110
Pinch? [2]
There isn't an exact counterpart for a couple of reasons. As the curve you specify is manually done, as soon as the object move...
10 year 11 2804
Fiducials - 32/64 bit windows [8]
Kresimir, Its mentioned in the FAQ. You can always download previous versions (up to a limit). Plea...
7 year 11 2376
Pothole detect [5]
Its better to purchase a calibrated system than using two cameras. Their solution seems quite good but I would ask them if they ...
8 year 11 3637
Target Localization Module? [10]
David, The Target Localization module has launched. At the bottom of <...
11 year 11 2521
Roborealm and Sabertooth 2x25 [10]
Andy, Another possibility is that the protocol has changed to the Sabertooth. We don't get informed...
9 year 11 3586
pololu servo control via xbee [8]
Sparky, Try with just one servo to ensure that you don't have power issues.
10 year 11 4084
Fiducials - 32/64 bit windows [5]
Kresimir, Can you confirm that the [x] High Precision checkbox is set in the latest version? I do s...
7 year 11 2376
AUV [10]
Ragronark, Q1: Not sure if that would be the only change. It is certainly the most common since dif...
8 year 11 3040
Pinch? [8]
Yes, that's the thought, use the current image for calibration and then keep things similar for the next images. There will be ...
10 year 11 2804
RoboRealm Network Tables [8]
I don't mean to be arrogant but that's what TableViewer is used for and why I mentioned it before. Do you need some instructions...
9 year 11 2590
AUV [6]
Have you written a quick Arduino Sketch that sets the values of pin3 and pin9 to 800 and 1000 to see if the motors respond?
8 year 11 3040
Nearest blob [10]
I get the green blob as the nearest to that point in 2.56.26 using the attached robofile. Perhaps the version wasn't quite up w...
10 year 11 2370
Basler Camera Scan Area Setting [11]
Amar, Double check the actual camera speed by unchecking the Run button to ensure you are not runni...
2 year 11 1851
RoboRealm Network Tables [6]
RR's version is right in the application title ... i.e. the thing you grab when you move the window :-)
9 year 11 2590
Pothole detect [3]
Farid, While it may be possible to classify 'potholes' using just vision alone it will take 1000's ...
8 year 11 3637
pololu servo control via xbee [6]
Yes, it does matter. You will need to ((x-500)*255)/2000 in order to convert from 500-2500 range to 0-255 range. ...
10 year 11 4084
Nearest blob [8]
Can you post the I.gif image too so that we can actually test what you are trying to do? I'm not s...
10 year 11 2370

« Prev   6  7  8  9  10  11 12  13  14  15    Next »
 New Post