loading
1455 posts
ThreadLast postPostsViews
Recognizing angle of blob depends on x line of camera [6]
Marek, That's a lot of questions! I would suggest that you review what already has been posted in t...
2 years 13 1372
Recognizing angle of blob depends on x line of camera [13]
Marek, What you have looks good. I think the other VVVV examples were using Modbus UDP instead of s...
2 years 13 1372
opening error [10]
Roland, If this is still an issue, can you download the latest and post that error message again? W...
4 years 12 673
Virtual camera shows only Roborealm logo [7]
John, The blue square indicates a permission problem with sending the image from RoboRealm to the V...
2 years 12 730
Edge probe issues [12]
Page, The probe reversal was due to the previous issue of the white/black not being in the correct ...
3 years 12 1230
How to use minoru? [8]
Ashira, Unfortunately that doesn't look like it is working. I can't tell if it is the reflections t...
2 years 12 1335
opening error [6]
Roland, Thanks for the detailed sequence. That's what we figured you were doing but could not repl...
4 years 12 673
Virtual camera shows only Roborealm logo [4]
Jeremy, As long as you used the button in the Virtual Camera tab to install the drivers it would ha...
2 years 12 730
Edge probe issues [8]
Page, The edge is broken into as many units as the Precision parameter specifies. This defaults and...
3 years 12 1230
How to use minoru? [6]
Can you press the Save button and type in something.jpg and post that image here? I need the raw images and its very important t...
2 years 12 1335
Arduino Motor Control [8]
Yes, you would need 6 variables and an understanding of what motors need to do what in order to move as expected. I.e. in order ...
2 years 12 1524
opening error [8]
Roland, That was "new test.robo" which is what you called the file that you saved. I included it ...
4 years 12 673
opening error [12]
There does seem to be a strange configuration on your machine that we are not able to replicate. For some reason spaces are not ...
4 years 12 673
Edge probe issues [2]
Page, Thanks for the robofile. That helps us understand the confusion.
3 years 12 1230
How to use minoru? [10]
senz3d would be better than stereo. Most projective systems are better than stereo which will suffer from lack of texture. Keep ...
2 years 12 1335
opening error [4]
Roland, Just confirming, this is the robofile with all the keyboard reads in it right? It appears t...
4 years 12 673
Multi object tracking and triggering [5]
Ok, try the following instead: if GetVariable("SCRIPT_COUNT") = 0 then
4 years 12 2465
Multi object tracking and triggering [10]
Aman, See the attached robofile which visits each of your green plants every couple seconds. Note t...
4 years 12 2465
opening error [2]
Roland, Can you post that corrected file so that we can try the same thing?
4 years 12 673
Multi object tracking and triggering [3]
Aman, That's to be expected (behaving erradically) since you are using the same variables for all ...
4 years 12 2465

« Prev   4  5  6  7  8 10  11  12  13    Next »
 New Post