loading
1530 posts
ThreadLast postPostsViews
Obstacle avoidance [2]
Azim, I'd first try to find some video seen from the actual robot as this will be very useful for t...
7 year 6 2081
RoboRealm's Pipeline [4]
Alex, Almost, main ALWAYS runs. If you have a tab select it will run Main and then the selected tab...
7 year 5 1885
RoboRealm's Pipeline [2]
Alex, The pipeline continued to run assuming you are talking about the Main tab. If you are using a...
7 year 5 1885
Automatic Start Up [2]
What OS are you testing on? It sounds like the full screen might just be covering the current inter...
7 year 4 1829
Automatic Start Up [4]
Sandy, I think we have a good idea on what the symptoms are. It sounds like the full screen mode is...
7 year 4 1829
Fiducials - 32/64 bit windows [10]
Kresimir, The latest improves and up and available for download. From what we can tell this should ...
7 year 11 2376
Fiducials - 32/64 bit windows [8]
Kresimir, Its mentioned in the FAQ. You can always download previous versions (up to a limit). Plea...
7 year 11 2376
Fiducials - 32/64 bit windows [5]
Kresimir, Can you confirm that the [x] High Precision checkbox is set in the latest version? I do s...
7 year 11 2376
Fiducials - 32/64 bit windows [3]
Kresimir, Do you have an image that shows the failure? The attached image seems to work fine in the...
7 year 11 2376
Zmodo Cameras [4]
Yes, that should work. The "module" is already installed. What it is asking for are extra DLL libra...
7 year 5 3348
Zmodo Cameras [2]
Steve, It most likely does have a similar URL but not one that we've come across before. Its not so...
7 year 5 3348
Serial Communication Arduino Uno [2]
Muhammad, You would need some sort of communication module. In this case I added a serial module th...
7 year 5 3362
Serial Communication Arduino Uno [4]
What version of RoboRealm are you using? If RoboRealm is crashing, you should be getting a crash re...
7 year 5 3362
Working with multiple tabs [2]
Please check ht...
7 year 2 1912
lynxmotion ssc 32U not connecting [4]
Max, Hmm, that seems like you have a good setup. I would try to contact Lynxmotion (RobotShop) to s...
7 year 4 2695
Finding Coordinates on Feature of Blob [6]
Alex, This is certainly a difficult problem due to the lack of contrast between the parts of the co...
7 year 6 2015
Finding Coordinates on Feature of Blob [4]
Alex, Its easier if you label (i.e. draw) ontop of the images you posted so that we can better unde...
7 year 6 2015
Center of Gravity [2]
Muhammad, The box size is based on a percent coverage of pixels. The algorithm starts at the COG wi...
7 year 2 2126
Servo controller [2]
Yes, that should work fine. What happens with USB connections is that they look  like serial connections and the proto...
7 year 2 2028
Image Comparison [4]
Sure, if you look at the Load_Image module you will see a checkbox that will enable the ability (and configuration) to read all ...
7 year 6 2751

« Prev   4  5  6  7  8 10  11  12  13    Next »
 New Post