First Posts| Thread | Last post | Posts | Views |
|
comparing the color of two blobs [8]
Hi STeven, The following is an example of a problem i am trying to solve. There are 5 blobs. 3 are ... |
12 year | 8 | 2902 |
|
Object strobing [4]
The entire scene may have spots where the light intensity is higher or equal to the light reflected from the object being strobe... |
12 year | 9 | 3068 |
|
Object strobing [2]
If i strobe an object (at a fixed frequency) in a scene, can roborealm mask out the scene leaving only the area of the strobing ... |
12 year | 9 | 3068 |
|
Directional close [4]
Fantastic. Will give it a try.... |
11 year | 9 | 2581 |
|
Directional close [2]
Hi Steven, Is it possible in the Close module to have a feature that allows the user to close in ei... |
11 year | 9 | 2581 |
|
Directional close [10]
Yes the directional symmetrical open is also very useful. Thanks.... |
11 year | 9 | 2581 |
|
Directional close [9]
Is there a way that the close function can work on a wider range. For example if a high value is given the maximum expansion is ... |
11 year | 9 | 2581 |
|
Object strobing [10]
STeven Yes you are right. Surface reflection, texture and color pose major problems. I might be bet... |
12 year | 9 | 3068 |
|
Directional close [8]
I used I big dilate value because I was worried that if the blobs were further apart it would not close. What value do you recom... |
11 year | 9 | 2581 |
|
Object strobing [9]
STeven, Yes and the fact that the robot (and the camera) is moving complicates things further (not ... |
12 year | 9 | 3068 |
|
Directional close [7]
My apologies. The close value I was using was way too high i.e. symmetrical horizontal close at value 14. I reduced it to value ... |
11 year | 9 | 2581 |
|
Object strobing [7]
The purpose of strobing is to differentiate bright areas in the scene with continuous light and areas where the light is strobin... |
12 year | 9 | 3068 |
Directional close [5]
Here is the gif image | 11 year | 9 | 2581 |
|
Object strobing [6]
Yes you are right. It is for obstacle avoidance. I am anticipating that the closer objects will appear brighter. Thanks... |
12 year | 9 | 3068 |
|
Directional close
Hi STeven, There seems to be an issue with the new feature. The directional close seems to effect b... |
11 year | 9 | 2581 |
|
Embedded PC [7]
Upgraded to 1GB RAM. Works fine now.... |
11 year | 10 | 2241 |
|
Embedded PC [6]
Managed to get it to work for now by increasing the virtual RAM (still image detection). I probably need to upgrade to 512MB in ... |
11 year | 10 | 2241 |
|
Embedded PC [5]
Just to update C drive 485 MB - 61.7MB free Z drive (named MS-RAMDRIVE) 29.5MB | 11 year | 10 | 2241 |
|
Embedded PC [4]
I got into the administrator profile and managed to install it. It seems to work but when i try to run my program it says "low ... |
11 year | 10 | 2241 |
|
Avoid bottom border [7]
This feature needs to work on a cropped image. In my project the image is already cropped before applying the blob filter.... |
12 year | 10 | 3045 |
|
New Post |