loading
32 posts
ThreadLast postPostsViews
surveillance and e-mail notification [7]
If i leave Usarneme empty i just get " invalid 'From Email' adress 'ikaricorp@gmail.com' in email."
16 year 8 2134
surveillance and e-mail notification [5]
(sorry for the previews post on the root of the forum sometimes it happens and i cant tell way) I j...
16 year 8 2134
surveillance and e-mail notification [3]
This is a very interesting module, but i cant put it to work. I'm using the correct (copy past from outlook) conf...
16 year 8 2134
RR and GPS [5]
Bu-323 is one of the best usb gps avaiable and a cheaper tho, have a magnetic base and a very good gps sensor.
16 year 8 2620
Generic HID device control from RoboRealm (plus wiimote) [6]
U dont need a wii to test it just a wiimote 30 / 40 € This site whave plenty of info ...
13 year 9 13175
Generic HID device control from RoboRealm (plus wiimote) [4]
Both keypreesse and as a joystick, for the joystick i have other software that i need to have running but atm im not at work so ...
13 year 9 13175
Generic HID device control from RoboRealm (plus wiimote) [2]
thats a great idea i use the wiimote to but to interface it whit the roboreal i must use "glovepie" to get the keys and axys. ...
13 year 9 13175
Windows XP Embedded SP2 [2]
Im doing the same bur whit a Creative Live Motion :) and im using a nano-itx. http://www.via.com.tw/en/initiatives...
16 year 10 8577
Windows XP Embedded SP2 [8]
Sorry i made a mistake on the pictures here they are: PX-1000g ...
16 year 10 8577
Windows XP Embedded SP2 [7]
OK this wiil be a long post. 1. Roboreal can run in XPe just dont take off any necessary component....
16 year 10 8577
Windows XP Embedded SP2 [4]
Sorry for all the confusion, my board is the pico-itx but i call it a nano because its one of a kind, its the only pico (100mm x...
16 year 10 8577
Framerate issues while object tracking [2]
I have the same board (1GB DDR2 677mhz) and have suffer the same problem, but not that low FPS 10 -17. Most likely...
15 year 36 4030

« Prev   1  2  
 New Post