| Thread | Last post | Posts | Views |
|
Binary image matching [4]
Anthony, Can you mention what kind of change you'd expect the dot pattern to do? I.e. | 13 year | 4 | 2664 |
|
Kinect IR 320x240 [5]
We'll double check things tonight as I know there were issues in the past with that res on the IR camera. | 13 year | 6 | 4477 |
|
Kinect IR 320x240 [3]
Yes, there are several better ways to move images around than using remote desktop. It depends on what you want to do with the i... |
13 year | 6 | 4477 |
|
Kinect IR 320x240 [7]
One additional point, try JUST the 320x240 IR image without the RGB. We've seen quite a few folks keep the RGB and IR image tog... |
13 year | 6 | 4477 |
|
Kinect IR 320x240 [6]
Ok, so the known issue with 320x240 is actually with the RGB mode and not the IR mode. We tried what you describe in your first ... |
13 year | 6 | 4477 |
|
See if the attached meets your needs. Note, it assumes that the scantron is horizontally aligned as in your image. If not, see i... |
13 year | 2 | 3358 |
|
Compiling Programs for FRC [3]
Jay, It doesn't compile within LabView but it does integrate with it. If you have a look at the AP... |
13 year | 2 | 2152 |
|
NetworkTables not connecting to Robot [4]
Mike, No problem, it just got updated last night. You'll have to download RR again to get that fix... |
13 year | 3 | 2174 |
|
Network Table Help [5]
We can't seem to find an obvious place to check the version number to verify if you are using 2.0 or not. So, can you confirm w... |
13 year | 6 | 2608 |
|
Network Table Help [3]
Hi, Yes, it sounds like the PC is not connecting to the CRio. Can you try running the SmartDashboar... |
13 year | 6 | 2608 |
|
Network Table Help [7]
Yes, it seems that there was a protocol version update which caused the version RR is using to be denied access to the tables. T... |
13 year | 6 | 2608 |
|
Seems that there was a typo in that url. Its been fixed but I've also attached the robofile to this post so that you have it di... |
13 year | 3 | 3187 |
|
Object Recognition App [3]
Daniel, First, what parts are you thinking of identifying. The OR module uses a couple different te... |
13 year | 2 | 2969 |
|
Human Detection [3]
If you can use something like a Kinect or Asus Xtion that will certainly be the easiest way to go. Also, thermal sensors are eas... |
13 year | 3 | 2739 |
|
Overlays on multiple camera views [3]
Mai, I'm not sure I understand the question completely, but if you want to display different overl... |
13 year | 3 | 3334 |
|
retrain on change not work [4]
Marco, If you check the Train dialog interface (where you specify the folder to train) you will see... |
13 year | 3 | 2359 |
|
Plugin Samsung Galaxy SII / Tab [3]
Christophe, This should be possible. What app are you using to create the phone as an IP camera? "... |
13 year | 2 | 2248 |
|
human skin colour detection and tracking [3]
Rakesh, That's a hard question to answer since it is too vague. You can find a lot of online resou... |
13 year | 2 | 2161 |
|
Write AVI Crashes [4]
Rud, Thanks for the note, we did see that issue with the Canvas and had updated a fix for it a whil... |
13 year | 3 | 4008 |
|
Optical Flow Needles not as expected [3]
Rud, The issue was caused by the Min Length that you had set to 30. When the filtering on this is p... |
13 year | 2 | 3046 |
|
New Post |
